Pressure instrument

Contact Information

Address: Building 10, Zhonglian Industrial Park, Zhongbei Town, Xiqing District, Tianjin

Telephone:+86-22-59958977

Mailbox:350332639@qq.com

+
  • 未标题-1(65).jpg

High frequency tetrafluoro rod type water drop anticorrosive radar level gauge

High frequency tetrafluoro rod type water drop anticorrosive radar level gauge

Key words:


24-hour service hotline:+86-22-59958977

E-commerce:+86 13212024523

Business phone:+86 18822166399

Bidding authorization:+86 13821081088


  • Product Description
  • Typical applications
  • After-sales commitment
    • Commodity name: High frequency tetrafluoro rod type water drop anticorrosive radar level gauge
    • Commodity ID: 1084834475528572928

    High frequency tetrafluoro rod type water drop anticorrosive radar level gauge

     

    Product introduction

    Water vapor resistant plateau series 26G high-frequency radar level gauge, the maximum measurement distance can reach 0 meters.It is mainly used to measure various corrosive liquids.For example: sulfuric acid, hydrochloric acid, nitric acid, alkaline sodium hydroxide, potassium hydroxide, etc.

    The radar level gauge antenna emits a very narrow microwave pulse, which propagates in space at the speed of light and encounters the surface of the medium under test. Part of its energy is reflected back and received by the same antenna.The time interval between the transmitted pulse and the received pulse is proportional to the distance from the antenna to the surface of the medium under test.Due to the extremely high propagation speed of electromagnetic waves, the time interval between the transmitted pulse and the received pulse is very small (on the order of nanoseconds) and it is difficult to confirm.This series of radar level meters adopts a special correlation demodulation technology, which can accurately identify the time interval between the transmitted pulse and the received pulse, so as to calculate the distance from the antenna to the surface of the medium under test.

    Product features

    1.A compact high-frequency non-contact sensor with high precision and accuracy.

    2.The measurement effect is better for powders, particles and other materials.The measurement method will not be affected by the large amount of dust, filling noise or air flow produced by pneumatic filling and temperature fluctuations.

    3.The beam angle is small, the energy is concentrated, and the radar installation location has greater flexibility.It has stronger anti-interference ability, which greatly improves the measurement accuracy and stability

    4.The small size of the antenna makes it easy to install the radar on site, and at the same time it has better adaptability to the measurement of small tanks and special tanks.

    5.The measurement blind spot is small, which maximizes the measurement range of the radar.

    Product real shot

    Measurement is not affected by external environmental factors

    Non-contact radar, no wear and no pollution, in a severe dust environment, it has little impact on the positioning work.

    Advanced technology and technology, strong anti-interference ability

    The beam angle is small, the energy is concentrated, the echo capability is enhanced, the signal-to-noise ratio is high, and better performance can be obtained in the case of fluctuations.

    IP67 protection, strong sealing

    The instrument fully meets the requirements of the protection level IP66/67, and the outlet port is well sealed, effectively isolating water and dust from entering.

    Product parameters

    Application: Various corrosive liquids

    Measuring range: 10 meters

    Process connection: thread, flange

    Process temperature: -40°C-130°

    Accuracy: ±5mm

    Protection level: IP67

    Frequency range: 26GHz

    Power supply: two-wire system (DC24V)/four-wire system (DC24V/AC220V)

    Signal output: 4-20mA/HART (two-wire/four-wire) RS485 Mod bus

    Explosion-proof grade: Exia IICT6 Ga|Exd IIC T6 Gb

    Shell: aluminum (single cavity/double cavity)/plastic/stainless steel single cavity

    Product installation

    Installation precautions:
    The minimum distance from the tank wall is 200 mm; when the radar antenna emits microwave pulses,

    it has a certain emission angle.There shall be no obstacles from the lower edge of the antenna to the

    surface of the medium under test, and in the area radiated by the microwave beam.

    The top plane of the tapered tank can be installed in the middle of the top of the

    tank to ensure that the bottom of the cone is measured.

    When there is a material pile, the antenna should be vertically aligned with the material surface.If the material surface

    is uneven, the stacking angle must use a universal flange to adjust the angle of the horn so that the angle of the horn

    is as aligned as possible with the material surface (due to the clear solid surface, the echo attenuation or even the loss of signal will be caused)

    Field application

    After-sales commitment

    01 Reliable corporate qualifications

    02 Invest heavily to create ingenuity and quality

    03 After-sales service commitment

    The company promises to the user that the hardware and accessories that should be provided when this instrument is supplied do not have any defects in the material and manufacturing process.Calculated from the date of purchase of the instrument, during the warranty period, if the user is notified of such defects, the company will implement unconditional free repair or free replacement of the products that are indeed defective.

    The company guarantees a 7-day return and 1-year warranty for all recorder products, and lifetime maintenance.

    1. For customers' technical questions, we promise to deal with them within 4 hours.

    2. For instruments returned to the factory for repair, we promise to issue test results within 3 working days and complete the repair within 7 working days.

    3. After the instrument is returned to the customer, the user will be visited within 2 weeks, and free consultation on automation-related technologies will be provided.

    Key words:
    • 高频四氟棒式水滴防腐型雷达液位计
  • The company promises to the user that the hardware and accessories to be provided during the supply of this instrument do not have any defects in materials and manufacturing processes. Starting from the date of purchase of the instrument, during the warranty period, if the user's notice of such defects is received, the company will implement unconditional free repair or free replacement for the defective products. The company for all recorder products are guaranteed 7 days back 1 year warranty, life-long maintenance.
     
    1. We promise to handle the customer's technical questions within 4 hours.
    2. We promise to issue the test results within 3 working days and complete the maintenance within 7 working days for the instruments returned to the factory for maintenance.
    3. The instrument will pay a return visit to the user within 2 weeks after returning to the customer, and provide free consultation on automation related technologies.

Product Consulting